Real time,
reliable, stand alone, affordable, easily updateable, MPEG-2
based, digital signage server with a frequency agile VHF /UHF
8VSB (ATSC) or QAM RF modulator for use in department stores,
airports, sports stadiums, and other public venues where many
high definition televisions are to be driven from a centralized
server via a coaxial cable. Will play either stored clips
from internal playlist or will play incoming streams from
other devices. This device will also capture incoming Transport
Streams to the local hard drive while its modulating .Can
coexist with analog modulators.
|
Real time,
reliable, stand alone, affordable, easily updateable, MPEG-2
based, digital signage server with 1-5 frequency agile VHF
/UHF 8VSB (ATSC) or QAM RF modulators for use in department
stores, airports, sports stadiums, and other public venues
where many high definition televisions are to be driven from
a centralized server via a coaxial cable. Will play either
stored clips from internal playlist or will play incoming
streams from other devices. This device will also capture
incoming Transport Streams to the local hard drive while its
modulating. Can coexist with analog modulators.
|
VHF/UHF
Class A amplifier with 30 dB gain for boosting signal levels
in large installations requiring power amplification
|
Standard
Features:
- 19 inch Rack Mount case with LCD touch panel interface
- Always on when power is on
- Supports all ATSC Formats including 720p and 1080i or
QAM( ITU T annex A,B,C)
- Capable of up to ten 3.8 Mbps SD or two 19.4 Mbps HD streams
when configured to use QAM Annex B.
- Capable of sending one 15 Mbps HD stream and one 4 mbps
SD stream when configured for ATSC
- Easy to use XP based GUI to reconfigure channel setup
- Inputs: DVB-ASI or ATSC
- Accurate 128 tap digital filter for accurate band shaping
- RF Output Frequency: 54-860 Mhz
- Output impedance is 75 ohms
- Output power level -25 to 0 dBm
- Will Upconvert and Remux any rate DVB-ASI Transport Stream
to ATSC compatible rate
- Ideal for live feeds to HD televisions in a public venue
|
Standard
Features:
- 19 inch Rack Mount case with LCD touch panel interface
- Always on when power is on
- Supports all ATSC Formats including 720p and 1080i or
QAM (ITU-T annex A,B,C)
- Capable of up to ten 3.8 Mbps SD or two 19.4 Mbps HD streams
when configured to use QAM (Annex B.)
- Capable of sending one 15 Mbps HD stream and one 4 mbps
SD stream when configured for ATSC
- Easy to use XP based GUI to reconfigure channel setup
- 1-5 modulated channels per chassis
- Inputs: DVB-ASI or SMPTE 310M
- Accurate 128 tap digital filter for accurate band shaping
- RF Output Frequency: 54-860 Mhz
- Output impedance is 75 ohms
- Output power level -25 to 0 dB
- Will Upconvert and Remux any rate DVB-ASI Transport Stream
to ATSC compatible rate
- Ideal for live feeds to HD televisions in a sports bar
or any public venue
- Other units with more channels and more modulations can
be quoted
|
Physical
interfaces:
- 1x RF input (VHF/UHF), BNC connector
- 1x RF output (VHF/UHF), N connector
- 1x DC input
|
Click here to enlarge
the diagram |
Small, Portable, Frequency
Agile, QAM (Annex B) Modulator with USB or IP input for the
real time output of live or stored HD streams coming via IP,
ASI, or local Hard Drive to RF oriented coax CCTV systems
with many modern Plasma and LCD televisions equipped with
built in QAM tuners. Inexpensive and easy to use device for
use in commercial establishments where a video based message
is available from a satellite feed or from the Local Hard
Drive. A companion SD or HD encoder is recommended where the
input is coming from a VGA or DVI output server.
|
Small, Portable, Frequency
Agile, 8VSB Modulator with USB or IP input for the real time
output of live or stored HD streams coming via IP, ASI, or
local Hard Drive(USB) to RF oriented coax CCTV systems with
many modern Plasma and LCD televisions equipped with built
in 8VSB tuners. Inexpensive and easy to use device for use
in commercial establishments where a video based message is
available from a satellite feed or from the Local Hard Drive.
A companion SD or HD encoder is recommended where the input
is coming from a VGA or DVI output server.
|