Combined DVB ASI PCIe Transmit and Receive 1-4 Channel Regular Size and Low Profile Cards

Home >> DVB ASI and SMPTE 310M PCI and PCIe I/O, Cards >> DVB PCIe Transmit or Receive Cards

		DVB PCIe Transmit Receive Cards DVB PCIe Transmit Receive Cards represent the next generation of DVB ASI PCI interfaces. We have long been a pioneer and once again we lead the way to PCIe... Recently we have begun to offer a free Transport Stream analyzer+player that anyone can download for free, click here!

DVB ASI PCIe (PCI Express) Low Profile Send and Receive Interface Card with Black Burst Sync Input, Accurate 25 ppm Clock, Unlimited PID Filtering, Jitter Management, Packet Arrival Timestamping, Auto Null Packet Insertion, and Optional Loop Through with Failover Relay, Optional (2.5 PPM) High Stability Oscillator. Designed to Send and Receive at the Same Time at Full 213 Mbps per Second.

4 channel DVB ASI PCIe 2.2 Send and Receive Interface Card with Accurate 25 ppm Clock, Unlimited PID Filtering, Jitter Management, Packet Arrival Timestamping, Auto Null Packet Insertion, and Optional Loop Through with Failover Relay, Optional (2.5 PPM) High Stability Oscillator. Any card I/O port can be factory configured as either in or out.

DVB-ASI PCIe Receiver/Transmitter Card With Two Input Ports Featuring Hardware Based Automatic Packet Size Detection, PID Filtering, and Packet Arrival Timestamping and Two Output Ports Featuring Enhanced Rate Control and Jitter Management

Standard Features:

• Compliant with DVB Standard A010 Rev1 and EN 50083
• 213 Mbits/sec DVB-ASI transmitter and receiver on one card
• Low Profile PCIe card form factor
• Drivers for Windows® and Linux®
• Windows XP/Server 2003/Server 2008/Linux API
• PCI Express 1.1 compliant interface bus
• DVB-ASI input and output
• External clock input via NTSC or PAL black burst signal
• Firmware controlled support for bypass mode
• “Snoop” function allows access to input data while in bypass mode
• Watchdog timer
• Software readable, unique serial number on each board
• Firmware is field upgradeable
• Software selectable transmit clock source
• Compliant with DVB standard A010 Rev1 and EN 50083
• LED status bits for Tx, Rx, Sync, and Carrier
• Accurate 25 PPM clock -- standard
• Automatic Null Bit Insertion
• Scatter Gather DMA
• Hardware PID filtering
• Packet Arrival Time Stamping
• PCIe bit rate is 2.5 Gbps
• Optional high stability oscillator with less than 2.5 ppm drift, meeting ATSC specifications

Applications:

• MPEG-2 Transport Stream Video Server I/O
• MPEG-2 Transport Stream Analyzer
• MPEG-2 Transport Stream Monitor

• MPEG-2 Transport Stream Repurposing

• SI Table Insertion
  

Standard Features:

• Two transmitter channels and two receiver channels on the same PCI Express card
• Aggregate data rate to 460 Mbits/second
• Multiple boards can be used for more inputs and outputs
• Bandwidth can be divided as required between ports
• Cable Equalization on receive channels
• Uses highly efficient Bus Master Link List DMA for data transform (saving CPU resources)
• Provides an interface for Layer-0 & Layer-1 of the DVB-ASI standard
• External clock input via NTSC or PAL black burst signal (available from on-board header)
• Drivers for Windows® and Linux®
• Windows XP/Server 2003/Server 2008/Linux API
• Advanced Receiver capabilities
  • Synchronizes incoming packets to byte boundaries
  • Automatic 188 and 204 packet size detection
  • Interrupt on in/out of sync
  • Software selectable option to strip 16 bytes from 204 byte packets
  • Unlimited PID filtering (any number of PIDs may be selected)
• Advanced Transmit capabilities
  • Enhanced transmit rate "Fine Tuning" control to <2.8 ppm granularity
  • Software selectable option to add sixteen - 0x00 bytes to 188 byte packets
  • External transmit clock inputs (black burst or external reference clocks)

Applications:

• DVB VoD (Video on Demand) Servers
• Cable TV
• Broadcast TV

Standard Features:

• Two transmitter channels and two receiver channels on the same PCI Express card
• Comes with low profile and regular bracket
• Full DVB-ASI throughput of 213 Mbps per channel
• Multiple boards can be used for more inputs and outputs
• Cable equalization on receive channels
• Uses highly efficient Bus Master Link List DMA for data transform (saving CPU resources)
• Provides an interface for Layer-0 & Layer-1 of the DVB-ASI standard
• External clock input via NTSC or PAL black burst signal (available from on-board header)
• Drivers for Windows® and Linux®
• Windows XP/Server 2003/Server 2008/Linux API
• Advanced Receiver capabilities
  • Synchronizes incoming packets to byte boundaries
  • Automatic 188- and 204-byte packet size detection
  • Interrupt on in/out of sync
  • Software selectable option to strip 16 bytes from 204 byte packets
  • Unlimited PID filtering (any number of PIDs may be selected)
• Advanced Transmit capabilities
  • Enhanced transmit rate "Fine Tuning" control to <2.8 ppm granularity
  • Software selectable option to add sixteen 0x00 bytes to 188 byte packets
  • External transmit clock input
• Mini-BNC to BNC adapter cables included

Applications:

• DVB VoD (Video on Demand) Servers
• Cable TV
• Broadcast TV

Now Shipping

Now Shipping

Now Shipping

Advanced Full Duplex DVB ASI PCIe (PCI Express) Send and Receive Interface Card with Accurate 25 ppm Clock, Unlimited PID Filtering, Jitter Management, Packet Arrival Timestamping, Auto Null Packet Insertion, and Optional Loop Through with Optional Failover Relay and Optional (2.5 PPM) High Stability Oscillator. Designed to Send and Receive at the Same Time, at Full 200 Mbps.

Two independent channel receive (useful for N+1 redundancy) and single channel send DVB ASI PCI 2.2 Interface Card with Accurate (25 ppm) Clock, Unlimited PID Filtering, Jitter Management, Packet Arrival Timestamping, Auto Null Packet Insertion, internal and external loopback, internal transport stream quality monitor, HW serial number, GPIO triggers, and software or external switch controlled relay based forced Loop Through. Optional (2.5 PPM) High Stability Oscillator, Optional Secondary Input, and Optional Failover Relay.

Standard Features:

• 270 Mbits/second DVB-ASI transmitter and receiver on one card
• Incorporates Single Lane PCI Express
• Drivers for Windows XP, Windows Server 2003, Windows Server 2008, and Linux
• Windows XP/Server 2003/Server 2008/Linux API
• Large buffer FIFOs eliminate latency problems
• Programmable Inter-byte and Inter-packet stuffing as per DVB specification
• Cable Equalization on the receiver input
• LED Status bits for Tx, Rx, Sync, and Carrier
• Advanced link-list DMA interface
• PCIe 1.0a compliant interface bus
• Advanced Receiver TS processing capabilities
  • Synchronizes incoming packets to byte boundaries
  • Automatic 188 and 204 packet size detection
  • Interrupt on in/out of synch
  • Software selectable option to Strip 16 bytes from 204 byte packets
  • Unlimited PID filtering (any number of PIDs may be selected)
• Advanced Transmit capabilities
  • Synchronizes incoming packets to byte boundaries
  • Enhanced transmit rate "Fine Tuning" control to <2.8 ppm granularity
  • Optional High Stability Oscillator with <2.8 ppm (special order option)
  • Software selectable option to add 16 - 0x00 bytes to 188 byte packets
  • External transmit clock input
• Optional high stability oscillator with less than 2.5 ppm drift, meeting ATSC specifications

Applications:

• MPEG-2 Transport Stream Video Server I/O
• MPEG-2 Transport Stream Analyzer
• MPEG-2 Transport Stream Monitor

• MPEG-2 Transport Stream Repurposing

• SI Table Insertion

• 270 Mbits/sec DVB ASI transmitter and receiver on one card
• Two DVB ASI inputs; secondary input via header
• A/B input selection is software controlled
• Two buffered ASI outputs
• Optional dual DVB-ASI Inputs
• Drivers for Windows® and Linux®
• Windows XP/Server 2003/Server 2008/Linux API
• Single Lane PCI Express interface
• Signal quality sensing support in hardware
• External clock input via NTSC or PAL black burst signal
• Firmware controlled support for bypass mode
• “Snoop” function allows access to input data while in bypass mode
• Control Interface port
• o 6 GPI optically isolated inputs
  o External override input for the mechanical bypass relay
  o Status output for firmware loop back
  o LED Status for TX, Rx, Sync, and Carrier
  o One general purpose control output
• Watchdog timer based on a 40 MHz 32-bit counter
• Silicon serial number
• Firmware is field upgradeable
• Software selectable transmit clock source
• Support for SMPTE 325
• Accurate 25 PPM clock -- standard
• Automatic Null Packet Insertion
• Scatter Gather DMA
• Hardware PID Filtering
• Packet arrival Time Stamping
• Jitter Management
• Compliant with DVB Standard A010 Rev1 and EN 50083
• Optional mechanical relay bypasses primary input to primary output on power failure
• Optional High Stability Oscillator with less than 2.5 ppm drift, meeting ATSC specifications
• Patent pending on key architecture
  

Applications:

• Video servers
• Datacasting and monitoring
• Electronic Program Guides (EPGs)
• Interface DVB MPEG-2 transport streams to the PCIe bus
• PID filtering of transport streams
• IP - DVB interfaces
• Data over DVB
• Interface DVB to ATSC
  
  

Now Shipping