 |
| DTTR 1000 - DVB Digital Terrestrial
Television Receiver |
|
| Features |
- DVB-T COFDM Receiver
-
UK channel table selectable with
upper & lower offsets
-
SNMP v1 Control (optional)
- Ideal front end for MPEG-2 Decoder
-
Dual DVB-ASI Outputs
-
Low Cost
-
Firmware upgradeable in
service.
-
Compact 1 RU Construction
-
Reset/Status port provides
alarm monitoring via contact
closure
|
| Specifications |
Input:
|
RF Frequency 51-858MHz |
| Bandwidth: |
8MHz |
| RF Input Impedance: |
75 Nominal |
| Sensitivity: |
-77dBm or better |
| Min. Input Level:: |
-75dBm 64QAM
-81dBm 16QAM
-86dBm QPSK |
| Return loss: |
>6dB |
| Outputs: |
MPEG-2 Transport Stream, 2 x DVB-ASI |
| Modulation Schemes: |
QPSK, 16QAM, 64QAM |
| Carriers Supported: |
2K, 8K |
| Guard Interval: |
All DVB Guard Intervals Supported - 1/32, 1/16, 1/8,3/4 |
| Error Correction: |
Viterbi FEC, all DVB code rates - 1/2, 2/3, 3/4, 5/6,
7/8
Reed Solomon (204 byte mode) |
| Hierarchical Modes: |
Non-H,  =1, =2, =4 |
| ASI Packet Modes: |
Burst, Byte |
| ASI Packet length: |
188-byte, 204-byte |
| Control: |
Serial RS232
Optional SNMP v1 over Ethernet
Optional remote monitoring and control via HTML web page |
| Dimensions: |
483mm wide, 44mm high, 340mm deep |
| Weight: |
2.3Kgs. |
| Power: |
100 to 240 VAC, 50/60Hz, 20W nominal |
|
|
|
Chinese
English
Korean 
Japanese 
French