 |
| DTCR 1000 - Digital Television Cable
Receiver |
|
| Features |
-
DVB-C 16 TO 256QAM Receiver
-
Frequency Tuning in 1MHz steps
-
SNMP v1 Control (optional)
- Ideal front end for MPEG-2 Decoder
-
Dual DVB-ASI Outputs
-
Low Cost
-
Firmware upgradeable in
service.
-
Compact 1 RU Construction
-
Reset/Status port provides
alarm monitoring via contact
closure
|
| Specifications |
Input:
|
RF Frequency 51-858MHz |
| Input Level per Channel: |
-10dBmV to +15dBmV |
| Symbol Rate: |
1.5 to 7 Mega Symbols/sec |
| RF Input Impedance: |
75 Nominal |
| L.O. Step
Size: |
62.5kHz |
| Return loss: |
>6dB |
| Outputs: |
MPEG-2 Transport Stream, 2 x DVB-ASI |
| Modulation Schemes: |
16QAM, 32QAM, 64QAM, 128QAM, 256QAM |
| Error Correction: |
Viterbi FEC, all DVB code rates - ½, 2/3, ¾, 5/6, 7/8
Reed Solomon (204 byte mode) |
| ASI Packet Modes: |
Burst, Byte |
| ASI Packet length: |
188-byte, 204-byte |
| Control: |
Serial
RS232
Optional SNMP v1 over Ethernet
Optional remote
monitoring and control via HTML web page |
| Dimensions: |
483mm wide, 44mm high, 340mm deep |
| Weight: |
2.3Kgs. |
| Power: |
100 to 240 VAC, 50/60Hz, 20W nominal |
|
|
|
Chinese
English
Korean 
Japanese 
French