8VSB- ATSC( 8VSB) Receivers, Redundancy Switches, and messaging servers

Broadcast Quality, 8VSB Receiver, High Definition MPEG-2 HD Decoder (14-45 Mbps), with DVB ASI Input or 8VSB RF Input and ATSC, SPI, SDI, HD SDI, Y/C, or Y Pr Pb Output. Dolby AC-3 and MPEG Audio Decode with Terminal Block Connectors. Ideal Cost Effective Off Air Receiver and Monitor. Now Supports Remote Management Via TCP/IP.

Broadcast Quality, Frequency Agile, 8VSB HDTV Receiver Demodulator with on board HD MPEG-2 TS Decoder with RF, 8VSB (ATSC) or TS input and MP@HL ASI, SMPTE 310M, SDI, HD-SDI, Composite, or RGB output. Dolby AC-3 and MPEG Audio decode with XLR connectors. Ideal receiver for Signal monitoring. Includes very high quality HD LCD monitor

Standard Features:

• Receives 8VSB signal from 75 ohm F-connector
• On Board PID filtering with selection from a 4 stream multiplex
• May choose input digital stream from on-air terrestrial, or SMPTE 310M, DVB-ASI and LVDS signal
• Output signal is available in SMPTE-310M, DVB-ASI and LVDS or several uncompressed formats
• MPEG-2 MP@HL compliant video decoder supplies digital and analog video signal
• Digital video signal compliant with SMPTE-292M (HD SDI) with embedded 6 channel audio (SMPTE-299M)
• Dolby AC-3 and MPEG-1/2 5.1 channel audio decoder
• AC-3 or PCM stereo audio selectable over BNC connector
• Dolby Prologic compatible stereo audio on two terminal block connectors
• RGB/YPbPr video signal with 1080i/720p/480p/480i video mode
• NTSC/PAL and S-video output available
• 4 lines by 20 characters fluorescent display
• PSIP/EIA-608 closed caption compliant
• 1U rack mountable frame
• Ethernet support
  
  

Standard Features:

• +75 ohm F-connector
• May choose digital stream from on-air terrestrial and DVB-ASI and SMPTE 310M signal
• Selected digital stream is supplied in DVB-ASI and SMPTE 310M format signal
• MPEG-2 MP@HL compliant video decoder supplies digital and analog video signal
• Digital video signal compliant with SMPTE-259M/SMPTE-292M (SDI) with embedded 2 channel audio (SMPTE-299M)
• Dolby AC-3 and MPEG-1/2 5.1 channel audio decoder
• Dolby Digital (AC-3) or PCM stereo audio selectable over BNC connector
• Dolby Prologic compatible stereo audio output on two BNC connectors
• Y/Pb/Pr and SDI video signal with 1080i/720p/480p/480i video mode
• NTSC/PAL video output available
• 4 channel audio level display on TFT-LCD monitor
• PSIP/EIA-608, 708 closed caption compliant
• 3U rack mountable frame
  

Back Connectors

click to enlarge

Front

Two Channel Real Time MPEG-2 SMPTE 310M Failover Switch with Real Time and Sophisticated Transport Stream Monitoring. Complete remote management, setup, and error reporting via web based interface. Created for satellite, cable, and other content where N+1 redundancy in signal paths is crucial.

Continuous SMPTE 310M (MPEG-2 Transport Stream) Playback with (SMPTE 310M) ATSC output for use as Failover Server when primary station path is unavailable

Standard Features:

• Automatic switch to secondary input
• Intelligent Real Time Transport Stream Monitoring
• Web interface for remote configuration management

• Access Control to restrict unauthorized users

• Mechanical Bypass Relay connects primary input to output in the event of power failure

• Configurable delay to switch from primary to secondary input

• Carrier Detect, Synchronization and Bitrate status on active input

• Configurable automatic switch back to primary

• 1 RU rackmount server

• Logging history indicates switch state with date and time stamp

• Green and Red Status indicators to indicate active and inactive inputs

• RoHS compliant server with redundant power supply

  
  
  

Failover Mechanism:

1. What conditions will trigger the failover?

DVB Guardian will monitor carrier detect and the presence of sync bytes in the stream.



2. Are the conditions user-programmable?

The user can program the length of time that both carrier detect and presence of sync. combined is monitored before a failover. This is programmable from 0 to 20 seconds.

Applications:

• Transport stream failover protection in cable head ends
• Transport stream protection in Teleports
• Transport stream protection for On Air video servers

Standard Features:

• Custom Transport Stream messages can be stored for emergency playback signal source.
• MPEG-2 Transport Stream Output and Opt. Input
• .1 to 100 TB Hard Drive
• Bit rate: 19.3 Mbps
• Supports both SPTS and MPTS
• Features Rich easy-to-use GUI
• Supports CD, 100BT,ATSC in.
• ATSC Input ATSC Output
• Includes Automatic TS Analysis Utility with PID and PCR clock info.
• Automatically uses the TS PCR info to calculate proper transport Stream Rate
• Selectable 188/204 Packet size with auto conversion
• Continuous play or single play modes
• Time Duration or xN Repeat settings
• Buffer Overrun or Underrun warnings
• Runs on Windows® 2000
• MPEG-2 TS Software viewer monitors output
• Industry Leader
  

Applications:

• Ideal for generating test streams for testing STB's
• Trade show signal source
• Backup/ redundancy server for Television Stations

High Speed, MPE Standard Compliant, Multiprotocol, ATSC Encapsulator for Cost Effective, and Seamless delivery of IP or any private data and or video over new US Digital Terrestrial TV Signal

Standard Features:

• Supports 1-65,000 IP Addresses
• Compiles with SMPTE 310M clock and jitter standards
• Supports standard ATSC (8VSB) modulators
• Linux Based Platform
• Remote Management
• Low Jitter
• Relies on opportunistic data insertion into ATSC null packet space
• Easy to use GUI
• Works with unicast and multicast modes
• Routing tables and statistics are easy to use
• Custom client software available
• Tested with standard ATSC PCI Receiver Cards

• Low cost delivery of content to local school districts
• Private Financial or other Data to STB's
• Data Service Providers
• Large Retail Organizations
• Government agencies