Broadcast Quality Frequency Agile High Definition 8/16 VSB Receiver Demodulator with MPEG-2 HD/SD Decoder (2.5-45 Mbps). Demodulates 8VSB RF and decodes it to DVB-ASI and decodes it to SDI, HD-SDI, RGB, YPrPb, or Composite Output. Transport Streams Play Out in HD or SD format. Optional Secondary SD Decoder with Composite Output Only. Dolby AC-3 and MPEG Audio Decode with XLR Connectors. Cost Effective MPEG-2 Decoder/Receiver. Additional Features include SNMP Management.
IN:
|
|
8/16 VSB, DVB-ASI |
OUT: |
|
ASI, SDI or HD-SDI, Analog Component (YPbPr or RGB), or Composite (NTSC or PAL) |
|
Broadcast Quality, Frequency Agile, 8VSB HDTV Receiver Demodulator with On Board HD MPEG-2 TS Decoder with RF (8VSB ATSC) or TS input and MP@HL ASI, SMPTE 310M, SDI, HD-SDI, Composite, or RGB Output. Dolby AC-3 and MPEG Audio Decoder with XLR Connectors. Ideal Receiver for Signal Monitoring in Small Spaces Such as ENG Trucks. Includes Very High Quality HD LCD Monitor.
|
Professional Grade, Rackmounted, Single or Multichannel Linux® Based 8VSB to IP Gateway that Integrates Our PC Bus Based 8VSB RF Receivers and Demodulates and Routes Selected Transport Streams to Any MAC Address via IP. Optionally Transcodes into H.264 Any Selected Transport Stream Program(s) to Any Address Via UDP, RTP, or HTTP. Can Work as a Low Cost "Catcher" in Small VOD Implementations. Typically the desired streams are streamed in real time using UDP or RTP via IP multicast or unicast streams to IP set top boxes (STB's) such as Amino, or designated VLC or MPlayer equipped PC clients for viewing. This product will allow you to monitor your ATSC Broadcast and those of your neighboring stations on any PC... The viewer would be VLC or something similar. |
Standard
Features:
- Input: 8/16 VSB, DVB-ASI
- Output: ASI, SDI or HD-SDI, Analog Component (YPbPr or RGB), or Composite (NTSC or PAL)
- Decodes and displays closed captioning (EIA 608 or EIA 708)
- Receives 8VSB signal via 75 ohm F-connector
- Choose digital stream from on-air terrestrial (8VSB) or DVB-ASI or SMPTE-310M signal
- MPEG-2 MP@HL compliant video decoder supplies either digital or analog video outputs
- Digital video signal compliant with SMPTE-259M/SMPTE-292M (SDI) with embedded 2 channel audio (SMPTE-299M)
- Dolby AC-3 and MPEG-1/2 5.1 channel audio decoder
- Dolby Digital (AC-3) or PCM stereo audio selectable over BNC connector
- Dolby Pro Logic compatible stereo audio output on one XLR connector and one D-sub 9P connector
- RGB video signal with 1080i/720p/480p/480i video mode
- NTSC/PAL video output available
- 2 lines by 40 characters LCD display
- Compact 1 RU rack mountable frame
- Front panel controls for fast setup
- Firmware upgradeable via internet or USB
- SNMP (10/100 Base T Ethernet) management
- Easy-to-use Web-based GUI
- PSIP display – PAT, PMT, MGT, VCT, EIT, STT
- Optional second RF input port
Applications:
- Off air 8VSB receiver
- MPEG-2 HD or SD Decoder
- HD-SDI file playback
- Content repurposing
|
Standard
Features:
- RF input Signal via 75 ohm F-connector
- May choose digital stream from on-air terrestrial and DVB-ASI and SMPTE 310M signal
- On-screen transport stream diagnostics
- Selected digital stream is supplied in DVB-ASI and SMPTE 310M format signal
- MPEG-2 MP@HL compliant video decoder supplies digital and analog video signal
- Digital video signal compliant with SMPTE-259M/SMPTE-292M (SDI) with embedded 2 channel audio (SMPTE-299M)
- Dolby AC-3 and MPEG-1/2 5.1 channel audio decoder
- Dolby Digital (AC-3) or PCM stereo audio selectable over BNC connector
- Dolby Pro Logic compatible stereo audio output on one XLR connector and one D-sub 9P connector
- Y/Pb/Pr and SDI video signal with 1080i/720p/480p/480i video mode
- NTSC/PAL video output available
- 4 channel audio level display on TFT-LCD monitor
- PSIP/EIA-608, 708 closed caption compliant
- 3 RU rack mountable frame
- Web-based remote management
- Optional systems:
- TAV900A with DVB-S
- TAV900A with DVB-T
Applications:
- 8VSB receiver with monitor for OB vans
- HDTV receiver/demodulator
- Signal monitoring
- Standard definition MPEG-2 decoder
Main Status Screen -- Click to enlarge
Input-Output Status Screen -- Click to enlarge
RF Configuration Screen -- Click to enlarge
BNC Out Configuration Screen -- Click to enlarge
|
Standard
Features:
- Multiplexes transport streams into IP packets
- Simultaneously receives transport streams from one to
four 8VSB stations
- Supports MPEG-2 and H.264 input and output, in SD and
HD format
- PID filtering
- 8VSB – terrestrial digital – input
- IP Output – UDP, RTP or HTTP
- 200 Mbps IP raw output capability
- Optional 12 Mbps IP transcoded H.264 output capability
- Transmits PAT, PMT, and PCR information
- Receives and transmits at the same time
- Remote configuration management via Web Browser and Secure
Shell (SSH)
- De-encapsulates data streams
- Supports NTSC or PAL
- Based on embedded Linux®
Applications:
- IPTV Unicasting or Multicasting
- Telco TV
- ENG (Electronic News Gathering) – Stream content to and from remote locations
- Streaming to designated VideoLAN VLC, Mplayer, or Windows Media Player clients
- Internet transmission of movie or video “dailies”
|
Chinese
English
Korean 
Japanese 
French
Low Power TV: 8VSB DEMODS/RECEIVERS
